Enclosure Cooling Made Easy With Cold Pump Closed Loop Cooling for Electrical Enclosures
Cold Pump® Enclosure Cooling Systems are thermostatically controlled, closed-loop air conditioners that use CFC-FREE R22 or HFC-134A
refrigerants. Room air is continuously drawn through an external filter, across condenser coils (where it removes the heat drawn
from the enclosure) and flows out the top external vent. The sealed enclosure remains clean and cool because internal air is cooled
and dehumidified continuously as it is drawn across the evaporator coils.
Cold Pump Enclosure Cooling Applications:
Vortec Cold Pumps are a reliable air conditioning system for electrical control panels and enclosures. These units, which
maintain NEMA 12 ratings, are perfect for both new installations as well as retrofitting to cabinets already in place.
Top and side mount models are available with cooling capacities ranging from 1800 to 6000 BTUH. Provides effective cooling
protection for heat-sensitive electronics in numerous applications.
|
Cold Pump Features and Benefits
• UL Listed / CE approved
• Maintain NEMA 12 cabinet
integrity
• Digital thermostat-preset /
75°F (23°C). Use standard
screwdriver to adjust thermostat.
• Automatic reset thermal
overload protection
• Washable aluminum external
air filter
• Suction and discharge
compressor access fittings
• Both 115V and 230V
models available
• Continuous evaporative
condensate management
system eliminates drain tubes,
buckets & wet slippery floors,
under normal conditions
|
