Dual Nozzle CAG

Product Overview

Versatile Spot Cooling for Machining, Repair Shops and More

Cold Air Guns use vortex tube technology and filtered compressed air to produce sub-freezing air as low as -30 deg F (-34 deg C) for numerous industrial spot cooling applications. With no moving parts to wear out, Cold Air Guns require no electricity at the target, just a compressed air source.

Cold Air Guns are most often used for cooling of metal parts, in the machining and repair of metals, plastics, wood, ceramics and other materials. Cold air machining outperforms mist coolants and substantially increases tool life and feed rates on dry machining operations. The effective cooling from a Cold Air Gun can eliminate heat-related parts growth while improving parts tolerance and surface finish quality. Cold Air Guns have adjustable temperature and flow settings; and some models have a frost free nozzle to eliminate mess from frost and condensation. The Dual Point Nozzle is ideal for applications where multi-directional cooling is needed, such as band saw blades, circular saw blades, and drill bits, among others.

Benefits

  • Increase dry machining speeds up to 36%
  • Extend tool life by 50%
  • Eliminates the mess, expense and safety concerns of using mist coolants
  • Reduce waiting or normalization time by cooling parts faster
  • Eliminate the potential for burning and scorching
  • Avoid secondary parts cleaning after machining
  • Reduce grinding wheel loading caused by overheating
  • Airflow clears sawdust, chips, shavings and dirt away from surface

Features

  • Flexible, dual nozzles provide cooling at two points simultaneously
  • Creates cold air up to 100 F deg (38 C deg) below the inlet compressed air temperature
  • Quiet operation; meets OSHA noise specifications
  • Adjustable temperature and flow rate
  • Highly reliable with no moving parts
  • Low pressure outlet air
  • Uses only compressed air – no Freon
  • System includes a magnetic base and a 5 micron auto-drain compressed air filter
  • Magnetic base allows for easy, close in positioning and easy portability

Videos

Vortec Frost Free Cold Air Gun

The Frost Free Cold Air Gun cools tools quickly and without the mess of liquid lubricants or frost from standard cold air guns. Used in a wide variety of applications including cutting and drilling, and will increase tool life and feed rates in dry machining operations.

Vortec Cold Air Pistol

The Cold Air Pistol delivers spot cooling on demand, for cooling parts and welds, speeds tool changes, sets adhesives and hot melts, and facilitates thermal cycling. Here the Cold Air Pistol spot cools hot bearings after installation on the shaft. The Cold Air Pistol cools instantaneously, cooling quickly and with no liquid mess.

Cold Air Gun in an OEM Application

MAG uses the Vortec Cold Air Gun in their VIPER® Fiber Placement Systems to improve the quality of the aerospace parts produced by VIPER. The Cold Air Gun chills and conditions the pre-impregnated graphite fiber resin, making it easier to dispense and resulting in the highest possible dexterity, flexibility and range for large to complex aerospace parts.

Specifications

Cold Air Gun610620630611
Compressed air pressure (psig) 80 - 100 80 - 100 80 - 100 80 - 100
Inlet size (NPT pipe thread, inches) 1/4 1/4 1/4 1/4
Minimum Outlet Temperature, deg F
(at 70 deg F inlet air)
-10 10 30 -10
Cooling Capacity (BTU/hr) 900 1500 2500 900
Air Consumption @ 100 psig (scfm) 15 25 35 15
Outlet Air Flow Rate (scfm) 2 to 15 8 to 25 18 to 35 2 to 15
Dimensions, inches        
      Overall Length  18 5/8 18 5/8 18 5/8 19 5/8
      Diameter 1 3/4 1 3/4 1 3/4 1 3/4
      Nozzle Length 8 8 8 9
      Flexible Nozzle Diameter 1 1 1 1 3/16
      Outlet Diameter (ID) 3/8 3/8 3/8 3/8
      Magnetic base diameter 3  3/16 3  3/16 3  3/16 3  3/16
      Magnetic base height 4 1/8 4 1/8 4 1/8 4 1/8
Weight, lbs 3.0 3.0 3.2 3.0
Supply hose        
      Diameter, inch  3/8  3/8  1/2  3/8
      Maximum recommended distance, feet 25 15 30 25
Recommended filter size 25 scfm 25 scfm 35 scfm 25 scfm
Filter model* 701S-24A 701S-24A 701S-36A 701S-24A
Cold Air Gun621631615424Microtarget
Compressed air pressure (psig) 80 - 100 80 - 100 80 - 100 80 - 100 40/80
Inlet size (NPT pipe thread, inches) 1/4 1/4 1/4 1/8 1/4" tubing
Minimum Outlet Temperature, deg F
(at 70 deg F inlet air)
20 35 0 10 35/24
Cooling Capacity (BTU/hr) 1500 2500 900 400 16/50
Air Consumption @ 100 psig (scfm) 25 35 15 8 4/6
Outlet Air Flow Rate (scfm) 7 to 25 16 to 35 9 4 0.16 to 0.8
Dimensions, inches          
      Overall Length  19 5/8 19 5/8 13 5 7/8 16
      Diameter 1 3/4 1 3/4 - 1 1/8 1 1/4
      Nozzle Length 9 9 - 5 7
      Flexible Nozzle Diameter 1 3/16 1 3/16 - 5/8 -
      Outlet Diameter (ID) 3/8 3/8 3/8 1/8  
      Magnetic base diameter 3  3/16 3  3/16 - - -
      Magnetic base height 4 1/8 4 1/8 - - -
Weight, lbs 3.0 3.2 0.8 1.2 1.0
Supply hose          
      Diameter, inch  3/8  1/2 3/8  1/4  1/4
      Maximum recommended distance, feet 15 30 25 20 40
Recommended filter size 25 scfm 35 scfm 25 scfm 8 scfm 8 scfm
Filter model* 701S-24A 701S-36A 701S-24A 402-20 402-20
Cold Air Gun610620630611
Compressed air pressure (bar) 5.5 - 7 5.5 - 7 5.5 - 7 5.5 - 7
Inlet size
1/4" NPT

1/4" NPT

1/4" NPT

1/4" NPT
Minimum Outlet Temperature, deg C
(at 20 deg C inlet air)
-23 -12 -1 -23
Cooling Capacity (BTU/hr) 225 378 630 225
Air Consumption @ 100 psig (slpm) 425 708 991 425
Outlet Air Flow Rate (slpm) 57 to 425 227 to 708 510 to 991 57 to 425
Dimensions, mm        
      Overall Length  473 473 473 498
      Diameter 44 44 44 44
      Nozzle Length 203 203 203 229
      Flexible Nozzle Diameter 25 25 25 30
      Outlet Diameter (ID) 9.5 9.5 9.5 9.5
      Magnetic base diameter 81 81 81 81
      Magnetic base height 105 105 105 105
Weight, kg 1.4 1.4 1.5 1.4
Supply hose        
      Diameter, mm 9.50 9.50 12.70 9.50
      Maximum recommended
distance, meters
8 5 9 8
Recommended filter size, slpm 708 708 991 708
Filter model* 701S-24A 701S-24A 701S-36A 701S-24A
Cold Air Gun621631615424Microtarget
Compressed air pressure (bar) 5.5 - 7 5.5 - 7 5.5 - 7 5.5 - 7 2.25/5.5
Inlet size 1/4" NPT 1/4" NPT 1/4" NPT 1/8" NPT 6.35 mm
tubing
Minimum Outlet Temperature, deg C
(at 20 deg C inlet air)
-7 2 -18 -12 2/-4
Cooling Capacity (BTU/hr) 378 630 225 101 4/12.5
Air Consumption @ 100 psig (slpm) 708 991 425 227 113
Outlet Air Flow Rate (slpm) 198 to 708 453 to 991 255 113 4.5 to 11.6
Dimensions, mm          
      Overall Length  498 498 330 149 406
      Diameter 44 44 -- 29 32
      Nozzle Length 229 229 -- 127 178
      Flexible Nozzle Diameter 30 30 -- 1042340 --
      Outlet Diameter (ID) 9.5 9.5 9.5 3.2 0
      Magnetic base diameter 81 81 -- -- --
      Magnetic base height 105 105 -- -- --
Weight, kg 1.4 1.5 0.4 0.5 0.5
Supply hose          
      Diameter, mm 9.50 12.70 9.50 6.35 6.35
      Maximum recommended
distance, meters
5 9 8 6 12
Recommended filter size, slpm 708 997 708 227 227
Filter model* 701S-24A 701S-36A 701S-24A 402-20 402-20

*Filter included with Cold Air Gun Systems

Literature

Product Brochures
Installation and Operating Instructions

Case Studies

Cold Air Gun Improves Production Rates & Quality in Paper Production

High heat on a 40” saw blade caused Carolina Paper Company to suspend production frequently to allow the blade to cool. After installing the Vortec Cold Air Gun, production rates improved by 42% and scorching was eliminated.

Click Here to Read

Wrapping It Up: Vortex Air Gun Aids in Aerospace Applications

A ribbon of composite graphite material wraps aerospace structures in Vortec client MAG’s innovative VIPER® Fiber Placement Systems. Vortec’s Cold Air Gun 610 ensures the composite tape achieves the correct shape without wrinkling.

Click Here to Read

Cooling Large Industrial Parts in 60 seconds

How do you take large industrial equipment from 350 to 100 degrees Fahrenheit in under 60 seconds? This was the challenge faced by Anderson Machine Manufacturing, a Richmond, VA-based company

Click Here to Read

Accessories

5 Micron Air Filter 701S-24A

Models: 610-1, 620-1, 611-1, 621-1, 615
5 Micron Air Filter 701S-36A

Models: 630-1, 631-1
Oil Removal Filter 701S-48

Models: 610, 610-1, 620, 620-1, 611, 611-1, 621, 621-1, 615
     
Oil Removal Filter 701S-54

Models: 630, 630-1, 631, 631-1
Magnetic Mounting Base 620-26

Models: 610-1, 620-1, 630-1, 611-1, 621-1, 631-1
Dual Outlet Flex Nozzle 610-30

Models: 610, 610-1, 620, 620-1, 630, 630-1
     
BUY NOW Request Info