Top of the page
Products > Enclosure Coolers > Hazloc Vortex A/C

keep Enclosures cool in Hazardous Locations

Hazardous Location (HazLoc) Duty Vortex A/C Coolers are designed specifically for purged* Electrical enclosures in Class I Div 2, Groups A,B,C and D locations, Class II Div 2, Groups F&G and Class III locations. The HazLoc Vortex A/C incorporates the most up-to-date features into Vortec’s line of highly reliable, cost effective enclosure coolers.
  • Sleek, modern design
  • Noise reduction of 78%, when compared to other vortex enclosure coolers
  • Energy use reduction through its integral mechanical thermostat
  • Quick and easy installation in about 5 minutes
  • Flexible installation: top, side or front (door) mount
  • Incorporates check valve to prevent loss of enclosure pressure when cooling is not required
  • T4 Temperature Class rating
The HazLoc Vortex A/C is available in 4 different cooling capacities. All of Vortec’s Enclosure Coolers keep Electrical and Electronic Enclosures cool, clean and protected and are a low cost alternative to expensive, high maintenance air conditioners; and avoid contamination with dirty, humid air caused by fans. Today’s small, compact multi-function electronic controls, variable speed drives, servos and programmable logic controllers are extremely sensitive to heat and contamination. Smaller cabinet sizes make temperature control difficult and prone to premature failures. Excessive heat will cause digital displays to misread, controls to drift, and breakers to trip below rated loads. The result is productivity lost due to machine or line shutdowns.

HazLoc Vortex A/Cs maintain a slight pressurization on the cabinet to keep electrical and electronic components clean and dry; and most are thermostatically controlled to maintain enclosure temperatures within a specified temperature range.

* Purge system not included with purchase
Prices start at $1,400

Benefits

  • Easy to install, takes about 5 minutes
  • No wiring required to install
  • UL Classified for Class I Div 2, Groups A,B,C and D, Class II Div 2, Groups F&G and Class III
  • Thermostatically controlled to maintain enclosure temperatures within ideal range
  • Highly reliable, with full 10 year warranty
  • No ambient, dirty or humid air enters the cabinet
  • Can be used on all cabinets, even in tight spaces
  • Operates in environments up to 175 deg F
  • Significantly lower cost, compared to explosion proof Freon air conditioners
  • Reduce operating cost with mechanical thermostat turning the unit on only when necessary
  • Very quiet, 62 dBA operation, 78% quieter than typical vortex coolers
  • Multiple cooling capacities available, to optimize performance and operating cost
  • Little maintenance required, as compared to Freon A/C and fans
  • Use no refrigerants
  • Sleek, modern design

Features

  • UL Classified
  • Small footprint to fit on all enclosures and in confined areas
  • Top, side or front (door) mount models available
  • Maintain temperature between 80 - 90 deg F
  • Supplied with air filter and ducting kit
  • Maintains slight pressurization in the enclosure
  • UL Listed and UL Classified

HazLoc Vortex A/C Specifications

Use the buttons to select either U.S. or Metric Dimension and either NPT or BSP Products
PRODUCT NUMBERCooling Capacity (BTU/hr)Air Consumption @ 100 psig (scfm)RatingSystem or Cooler Only?Sound LevelThermostat
721590015HazLoc*Cooler Only60 dBAMechanical
7225150025HazLoc*Cooler Only66 dBAMechanical
7235250035HazLoc*Cooler Only72 dBAMechanical
7270500070HazLoc*Cooler Only75 dBAMechanical
751590015HazLoc*System60 dBAMechanical
7525150025HazLoc*System66 dBAMechanical
7535250035HazLoc*System72 dBAMechanical
7570500070HazLoc*System75 dBAMechanical
PRODUCT NUMBERCooling Capacity (BTU/hr)Air Consumption @ 100 psig (scfm)RatingSystem or Cooler Only?Sound LevelThermostat
7215-BSP90015HazLoc*Cooler Only60 dBAMechanical
7225-BSP150025HazLoc*Cooler Only66 dBAMechanical
7235-BSP250035HazLoc*Cooler Only72 dBAMechanical
7270-BSP500070HazLoc*Cooler Only75 dBAMechanical
7515-BSP90015HazLoc*System60 dBAMechanical
7525-BSP150025HazLoc*System66 dBAMechanical
7535-BSP250035HazLoc*System72 dBAMechanical
7570-BSP500070HazLoc*System75 dBAMechanical
PRODUCT NUMBERCooling Capacity (Watts)Air Consumption @ 6.9 bar (slpm)RatingSystem or Cooler Only?Sound LevelThermostat
7215264425HazLoc*Cooler Only60 dBAMechanical
7225440708HazLoc*Cooler Only66 dBAMechanical
7235733992HazLoc*Cooler Only72 dBAMechanical
727014651983HazLoc*Cooler Only75 dBAMechanical
7515264425HazLoc*System60 dBAMechanical
7525440708HazLoc*System66 dBAMechanical
7535733992HazLoc*System72 dBAMechanical
757014651983HazLoc*System75 dBAMechanical
PRODUCT NUMBERCooling Capacity (Watts)Air Consumption @ 6.9 bar (slpm)RatingSystem or Cooler Only?Sound LevelThermostat
7215-BSP264425HazLoc*Cooler Only60 dBAMechanical
7225-BSP440708HazLoc*Cooler Only66 dBAMechanical
7235-BSP733992HazLoc*Cooler Only72 dBAMechanical
7270-BSP14651983HazLoc*Cooler Only75 dBAMechanical
7515-BSP264425HazLoc*System60 dBAMechanical
7525-BSP440708HazLoc*System66 dBAMechanical
7535-BSP733992HazLoc*System72 dBAMechanical
7570-BSP14651983HazLoc*System75 dBAMechanical

* Class I Div 2, Class II Div 2 Groups F & G, Class III and Groups A, B, C and D locations.



Product Instructions



Case Studies

HAZLOC VORTEX A/C OFFERS HIGH RELIABILITY AT LOW COSTS 

Applied Rigaku Technologies faced the challenge of effectively and efficiently cooling their NEX OL Process Elemental Analyzer while meeting their customers’ price expectations. When exploring potential cooling options, the team at ART found that most air conditioning solutions were cost prohibitive. They needed a cooling solution that not only provided the necessary cooling capacity, but also adhered to the specific location classification requirements of their customers. Finding a solution that met these criteria and fit within their pricing requirements was no easy task... 


Accessories

LIT0201 Cold Air Guns
LIT0201 Cold Air Guns
Products > Enclosure Coolers > Hazloc Vortex A/C

keep Enclosures cool in Hazardous Locations

Hazardous Location (HazLoc) Duty Vortex A/C Coolers are designed specifically for purged* Electrical enclosures in Class I Div 2, Groups A,B,C and D locations, Class II Div 2, Groups F&G and Class III locations. The HazLoc Vortex A/C incorporates the most up-to-date features into Vortec’s line of highly reliable, cost effective enclosure coolers.
  • Sleek, modern design
  • Noise reduction of 78%, when compared to other vortex enclosure coolers
  • Energy use reduction through its integral mechanical thermostat
  • Quick and easy installation in about 5 minutes
  • Flexible installation: top, side or front (door) mount
  • Incorporates check valve to prevent loss of enclosure pressure when cooling is not required
  • T4 Temperature Class rating
The HazLoc Vortex A/C is available in 4 different cooling capacities. All of Vortec’s Enclosure Coolers keep Electrical and Electronic Enclosures cool, clean and protected and are a low cost alternative to expensive, high maintenance air conditioners; and avoid contamination with dirty, humid air caused by fans. Today’s small, compact multi-function electronic controls, variable speed drives, servos and programmable logic controllers are extremely sensitive to heat and contamination. Smaller cabinet sizes make temperature control difficult and prone to premature failures. Excessive heat will cause digital displays to misread, controls to drift, and breakers to trip below rated loads. The result is productivity lost due to machine or line shutdowns.

HazLoc Vortex A/Cs maintain a slight pressurization on the cabinet to keep electrical and electronic components clean and dry; and most are thermostatically controlled to maintain enclosure temperatures within a specified temperature range.

* Purge system not included with purchase
Prices start at $1,400

Benefits

  • Easy to install, takes about 5 minutes
  • No wiring required to install
  • UL Classified for Class I Div 2, Groups A,B,C and D, Class II Div 2, Groups F&G and Class III
  • Thermostatically controlled to maintain enclosure temperatures within ideal range
  • Highly reliable, with full 10 year warranty
  • No ambient, dirty or humid air enters the cabinet
  • Can be used on all cabinets, even in tight spaces
  • Operates in environments up to 175 deg F
  • Significantly lower cost, compared to explosion proof Freon air conditioners
  • Reduce operating cost with mechanical thermostat turning the unit on only when necessary
  • Very quiet, 62 dBA operation, 78% quieter than typical vortex coolers
  • Multiple cooling capacities available, to optimize performance and operating cost
  • Little maintenance required, as compared to Freon A/C and fans
  • Use no refrigerants
  • Sleek, modern design

Features

  • UL Classified
  • Small footprint to fit on all enclosures and in confined areas
  • Top, side or front (door) mount models available
  • Maintain temperature between 80 - 90 deg F
  • Supplied with air filter and ducting kit
  • Maintains slight pressurization in the enclosure
  • UL Listed and UL Classified

HazLoc Vortex A/C Specifications

Use the buttons to select either U.S. or Metric Dimension and either NPT or BSP Products
PRODUCT NUMBERCooling Capacity (BTU/hr)Air Consumption @ 100 psig (scfm)RatingSystem or Cooler Only?Sound LevelThermostat
721590015HazLoc*Cooler Only60 dBAMechanical
7225150025HazLoc*Cooler Only66 dBAMechanical
7235250035HazLoc*Cooler Only72 dBAMechanical
7270500070HazLoc*Cooler Only75 dBAMechanical
751590015HazLoc*System60 dBAMechanical
7525150025HazLoc*System66 dBAMechanical
7535250035HazLoc*System72 dBAMechanical
7570500070HazLoc*System75 dBAMechanical
PRODUCT NUMBERCooling Capacity (BTU/hr)Air Consumption @ 100 psig (scfm)RatingSystem or Cooler Only?Sound LevelThermostat
7215-BSP90015HazLoc*Cooler Only60 dBAMechanical
7225-BSP150025HazLoc*Cooler Only66 dBAMechanical
7235-BSP250035HazLoc*Cooler Only72 dBAMechanical
7270-BSP500070HazLoc*Cooler Only75 dBAMechanical
7515-BSP90015HazLoc*System60 dBAMechanical
7525-BSP150025HazLoc*System66 dBAMechanical
7535-BSP250035HazLoc*System72 dBAMechanical
7570-BSP500070HazLoc*System75 dBAMechanical
PRODUCT NUMBERCooling Capacity (Watts)Air Consumption @ 6.9 bar (slpm)RatingSystem or Cooler Only?Sound LevelThermostat
7215264425HazLoc*Cooler Only60 dBAMechanical
7225440708HazLoc*Cooler Only66 dBAMechanical
7235733992HazLoc*Cooler Only72 dBAMechanical
727014651983HazLoc*Cooler Only75 dBAMechanical
7515264425HazLoc*System60 dBAMechanical
7525440708HazLoc*System66 dBAMechanical
7535733992HazLoc*System72 dBAMechanical
757014651983HazLoc*System75 dBAMechanical
PRODUCT NUMBERCooling Capacity (Watts)Air Consumption @ 6.9 bar (slpm)RatingSystem or Cooler Only?Sound LevelThermostat
7215-BSP264425HazLoc*Cooler Only60 dBAMechanical
7225-BSP440708HazLoc*Cooler Only66 dBAMechanical
7235-BSP733992HazLoc*Cooler Only72 dBAMechanical
7270-BSP14651983HazLoc*Cooler Only75 dBAMechanical
7515-BSP264425HazLoc*System60 dBAMechanical
7525-BSP440708HazLoc*System66 dBAMechanical
7535-BSP733992HazLoc*System72 dBAMechanical
7570-BSP14651983HazLoc*System75 dBAMechanical

* Class I Div 2, Class II Div 2 Groups F & G, Class III and Groups A, B, C and D locations.



Product Instructions



Case Studies

HAZLOC VORTEX A/C OFFERS HIGH RELIABILITY AT LOW COSTS 

Applied Rigaku Technologies faced the challenge of effectively and efficiently cooling their NEX OL Process Elemental Analyzer while meeting their customers’ price expectations. When exploring potential cooling options, the team at ART found that most air conditioning solutions were cost prohibitive. They needed a cooling solution that not only provided the necessary cooling capacity, but also adhered to the specific location classification requirements of their customers. Finding a solution that met these criteria and fit within their pricing requirements was no easy task... 


Accessories

LIT0201 Cold Air Guns
LIT0201 Cold Air Guns