Products > Enclosure Coolers > ATEX Vortex A/C

Keep Enclosures cool in ATEX Zones 2 and 22

ATEX Vortex A/C Coolers are designed specifically for purged * Electrical Enclosures in IECEx, ATEX Zones 2 and 22 and Temperature Class T4 areas. The ATEX Vortex A/C incorporates the most up-to-date features into Vortec’s line of highly reliable, cost effective enclosure coolers.
  • IECEx Certified for Explosive Atmospheres
  • Sleek, modern design
  • Noise reduction of 78%, when compared to other vortex enclosure coolers
  • Energy use reduction through its integral mechanical thermostat
  • Quick and easy installation in about 5 minutes
  • Flexible installation: top, side or front (door) mount
  • Incorporates check valve to prevent loss of enclosure pressure when cooling is not required
  • ATEX Certification Ex II 3 GD T4
  • Tamb -20°C to 80°C (-4°F to 175°F)
  • T4 Temperature Class rating
The ATEX Vortex A/C is available in 4 different cooling capacities from 900 to 5,000 BTU/hr. All of Vortec’s Enclosure Coolers keep Electrical and Electronic Enclosures cool, clean and protected and are a low cost alternative to expensive, high maintenance air conditioners; and avoid contamination with dirty, humid air caused by fans. Today’s small, compact multi-function electronic controls, variable speed drives, servos and programmable logic controllers are extremely sensitive to heat and contamination. Smaller cabinet sizes make temperature control difficult and prone to premature failures. Excessive heat will cause digital displays to misread, controls to drift, and breakers to trip below rated loads. The result is productivity lost due to machine or line shutdowns.

ATEX Vortex A/Cs maintain a slight pressurization on the cabinet to keep electrical and electronic components clean and dry; and most are thermostatically controlled to maintain enclosure temperatures within a specified temperature range.

* Purge system not included with purchase
Prices start at $2,920

Benefits

  • Easy to install, takes about 5 minutes
  • No wiring required to install
  • ATEX Certified for Zones 2 and 22
  • Thermostatically controlled to maintain enclosure temperatures within ideal range
  • Highly reliable, with full 10 year warranty
  • No ambient, dirty or humid air enters the cabinet
  • Can be used on all cabinets, even in tight spaces
  • Operates in environments up to 175 deg F
  • Significantly lower cost, compared to explosion proof Freon air conditioners
  • Reduce operating cost with mechanical thermostat turning the unit on only when necessary
  • Very quiet, 62 dBA operation, 78% quieter than typical vortex coolers
  • Multiple cooling capacities available, to optimize performance and operating cost
  • Little maintenance required, as compared to Freon A/C and fans
  • Use no refrigerants
  • Sleek, modern design

Features

  • IECEx Certified for Explosive Atmospheres
  • ATEX Certified Ex II 3 GD T4
  • Tamb -20°C to 80°C (-4°F to 175°F)
  • Small footprint to fit on all enclosures and in confined areas
  • Top, side or front (door) mount models available
  • Maintain temperature between 80 - 90 deg F
  • Supplied with air filter and ducting kit
  • Maintains slight pressurization in the enclosure

ATEX Vortex A/C Specifications

Use the buttons to select either U.S. or Metric Dimension and either NPT or BSP Products
PRODUCT NUMBERCooling Capacity (BTU/hr)Air Consumption @ 100 psig (scfm)RatingSystem or Cooler Only?Sound LevelThermostat
731590015ATEX*Cooler Only60 dBAMechanical
7325150025ATEX*Cooler Only66 dBAMechanical
7335250035ATEX*Cooler Only72 dBAMechanical
7370500070ATEX*Cooler Only75 dBAMechanical
741590015ATEX*System60 dBAMechanical
7425150025ATEX*System66 dBAMechanical
7435250035ATEX*System72 dBAMechanical
7470500070ATEX*System75 dBAMechanical
PRODUCT NUMBERCooling Capacity (BTU/hr)Air Consumption @ 100 psig (scfm)RatingSystem or Cooler Only?Sound LevelThermostat
7315-BSP90015ATEX*Cooler Only60 dBAMechanical
7325-BSP150025ATEX*Cooler Only66 dBAMechanical
7335-BSP250035ATEX*Cooler Only72 dBAMechanical
7370-BSP500070ATEX*Cooler Only75 dBAMechanical
7415-BSP90015ATEX*System60 dBAMechanical
7425-BSP150025ATEX*System66 dBAMechanical
7435-BSP250035ATEX*System72 dBAMechanical
7470-BSP500070ATEX*System75 dBAMechanical
PRODUCT NUMBERCooling Capacity (Watts)Air Consumption @ 100 psig (slpm)RatingSystem or Cooler Only?Sound LevelThermostat
7315264425ATEX*Cooler Only60 dBAMechanical
7325440708ATEX*Cooler Only66 dBAMechanical
7335733992ATEX*Cooler Only72 dBAMechanical
737014651983ATEX*Cooler Only75 dBAMechanical
7415264425ATEX*System60 dBAMechanical
7425440708ATEX*System66 dBAMechanical
7435733992ATEX*System72 dBAMechanical
747014651983ATEX*System75 dBAMechanical
PRODUCT NUMBERCooling Capacity (Watts)Air Consumption @ 100 psig (slpm)RatingSystem or Cooler Only?Sound LevelThermostat
7315-BSP264425ATEX*Cooler Only60 dBAMechanical
7325-BSP440708ATEX*Cooler Only66 dBAMechanical
7335-BSP733992ATEX*Cooler Only72 dBAMechanical
7370-BSP14651983ATEX*Cooler Only75 dBAMechanical
7415-BSP264425ATEX*System60 dBAMechanical
7425-BSP440708ATEX*System66 dBAMechanical
7435-BSP733992ATEX*System72 dBAMechanical
7470-BSP14651983ATEX*System75 dBAMechanical

* ATEX Zones 2 & 22 and Temperature Class T4 Areas (Ex II 3 GD T4)



Product Instructions



Accessories

LIT0201 Cold Air Guns
LIT0201 Cold Air Guns
Products > Enclosure Coolers > ATEX Vortex A/C

Keep Enclosures cool in ATEX Zones 2 and 22

ATEX Vortex A/C Coolers are designed specifically for purged * Electrical Enclosures in IECEx, ATEX Zones 2 and 22 and Temperature Class T4 areas. The ATEX Vortex A/C incorporates the most up-to-date features into Vortec’s line of highly reliable, cost effective enclosure coolers.
  • IECEx Certified for Explosive Atmospheres
  • Sleek, modern design
  • Noise reduction of 78%, when compared to other vortex enclosure coolers
  • Energy use reduction through its integral mechanical thermostat
  • Quick and easy installation in about 5 minutes
  • Flexible installation: top, side or front (door) mount
  • Incorporates check valve to prevent loss of enclosure pressure when cooling is not required
  • ATEX Certification Ex II 3 GD T4
  • Tamb -20°C to 80°C (-4°F to 175°F)
  • T4 Temperature Class rating
The ATEX Vortex A/C is available in 4 different cooling capacities from 900 to 5,000 BTU/hr. All of Vortec’s Enclosure Coolers keep Electrical and Electronic Enclosures cool, clean and protected and are a low cost alternative to expensive, high maintenance air conditioners; and avoid contamination with dirty, humid air caused by fans. Today’s small, compact multi-function electronic controls, variable speed drives, servos and programmable logic controllers are extremely sensitive to heat and contamination. Smaller cabinet sizes make temperature control difficult and prone to premature failures. Excessive heat will cause digital displays to misread, controls to drift, and breakers to trip below rated loads. The result is productivity lost due to machine or line shutdowns.

ATEX Vortex A/Cs maintain a slight pressurization on the cabinet to keep electrical and electronic components clean and dry; and most are thermostatically controlled to maintain enclosure temperatures within a specified temperature range.

* Purge system not included with purchase
Prices start at $2,920

Benefits

  • Easy to install, takes about 5 minutes
  • No wiring required to install
  • ATEX Certified for Zones 2 and 22
  • Thermostatically controlled to maintain enclosure temperatures within ideal range
  • Highly reliable, with full 10 year warranty
  • No ambient, dirty or humid air enters the cabinet
  • Can be used on all cabinets, even in tight spaces
  • Operates in environments up to 175 deg F
  • Significantly lower cost, compared to explosion proof Freon air conditioners
  • Reduce operating cost with mechanical thermostat turning the unit on only when necessary
  • Very quiet, 62 dBA operation, 78% quieter than typical vortex coolers
  • Multiple cooling capacities available, to optimize performance and operating cost
  • Little maintenance required, as compared to Freon A/C and fans
  • Use no refrigerants
  • Sleek, modern design

Features

  • IECEx Certified for Explosive Atmospheres
  • ATEX Certified Ex II 3 GD T4
  • Tamb -20°C to 80°C (-4°F to 175°F)
  • Small footprint to fit on all enclosures and in confined areas
  • Top, side or front (door) mount models available
  • Maintain temperature between 80 - 90 deg F
  • Supplied with air filter and ducting kit
  • Maintains slight pressurization in the enclosure

ATEX Vortex A/C Specifications

Use the buttons to select either U.S. or Metric Dimension and either NPT or BSP Products
PRODUCT NUMBERCooling Capacity (BTU/hr)Air Consumption @ 100 psig (scfm)RatingSystem or Cooler Only?Sound LevelThermostat
731590015ATEX*Cooler Only60 dBAMechanical
7325150025ATEX*Cooler Only66 dBAMechanical
7335250035ATEX*Cooler Only72 dBAMechanical
7370500070ATEX*Cooler Only75 dBAMechanical
741590015ATEX*System60 dBAMechanical
7425150025ATEX*System66 dBAMechanical
7435250035ATEX*System72 dBAMechanical
7470500070ATEX*System75 dBAMechanical
PRODUCT NUMBERCooling Capacity (BTU/hr)Air Consumption @ 100 psig (scfm)RatingSystem or Cooler Only?Sound LevelThermostat
7315-BSP90015ATEX*Cooler Only60 dBAMechanical
7325-BSP150025ATEX*Cooler Only66 dBAMechanical
7335-BSP250035ATEX*Cooler Only72 dBAMechanical
7370-BSP500070ATEX*Cooler Only75 dBAMechanical
7415-BSP90015ATEX*System60 dBAMechanical
7425-BSP150025ATEX*System66 dBAMechanical
7435-BSP250035ATEX*System72 dBAMechanical
7470-BSP500070ATEX*System75 dBAMechanical
PRODUCT NUMBERCooling Capacity (Watts)Air Consumption @ 100 psig (slpm)RatingSystem or Cooler Only?Sound LevelThermostat
7315264425ATEX*Cooler Only60 dBAMechanical
7325440708ATEX*Cooler Only66 dBAMechanical
7335733992ATEX*Cooler Only72 dBAMechanical
737014651983ATEX*Cooler Only75 dBAMechanical
7415264425ATEX*System60 dBAMechanical
7425440708ATEX*System66 dBAMechanical
7435733992ATEX*System72 dBAMechanical
747014651983ATEX*System75 dBAMechanical
PRODUCT NUMBERCooling Capacity (Watts)Air Consumption @ 100 psig (slpm)RatingSystem or Cooler Only?Sound LevelThermostat
7315-BSP264425ATEX*Cooler Only60 dBAMechanical
7325-BSP440708ATEX*Cooler Only66 dBAMechanical
7335-BSP733992ATEX*Cooler Only72 dBAMechanical
7370-BSP14651983ATEX*Cooler Only75 dBAMechanical
7415-BSP264425ATEX*System60 dBAMechanical
7425-BSP440708ATEX*System66 dBAMechanical
7435-BSP733992ATEX*System72 dBAMechanical
7470-BSP14651983ATEX*System75 dBAMechanical

* ATEX Zones 2 & 22 and Temperature Class T4 Areas (Ex II 3 GD T4)



Product Instructions



Accessories

LIT0201 Cold Air Guns
LIT0201 Cold Air Guns