Benefits

• Easy to install, takes less than 10 minutes
• No wiring required to install, comes pre-wired
• Thermostatically controlled to maintain enclosure temperatures at a user defined temperature
• Operates effectively at 40 - 150 psi pressure levels, does not require a specific pressure
• Highly reliable, with full 10 year warranty
• No ambient, dirty or humid air enters the enclosure
• Can be used on all enclosures, even in tight spaces
• Operates in environments up to 175 deg F 80 deg C
• Reduce operating cost with electric thermostat turning the unit on only when necessary
• Very quiet, 62 dBA operation, 78% quieter than standard vortex coolers
• Multiple cooling capacities available, to optimize performance and operating cost
• Little maintenance required, as compared to Freon A/C and fans
• Use no refrigerants
• Sleek, modern design

Features

• UL Listed Type 4/4X
• Small footprint to fit on all enclosures and in confined areas
• Can be mounted on the top, side, or front (door) of the enclosure
• Maintain temperatures at a user defined thermostat setting
• Systems are supplied with air filter and ducting kit
• Maintains slight pressurization in the enclosure while running
• 10 year warranty

How To Videos

Electric Vortex AC Enclosure Cooler Installation

Electric Vortex A/C Enclosure Coolers are the most advanced line of Vortec enclosure coolers and incorporate the most up-to-date features of the Vortex A/C and Vortex Cooler lines. These enclosure coolers are yet another innovative compressed air product in Vortec’s line of highly reliable, cost effective enclosure coolers.

Product Overview

Electric Vortex A/C Enclosure Coolers are the most advanced line of Vortec enclosure coolers and incorporate the most up-to-date features of the Vortex A/C and Vortex Cooler lines. These enclosure coolers are yet another innovative compressed air product in Vortec’s line of highly reliable, cost effective enclosure coolers.

• Sleek, modern design
• Noise reduction of 78%, when compared to standard vortex enclosure coolers
• Energy reduction through its integral electric thermostat
• Quick and easy installation in less than 10 minutes
• Flexible installation: top, side or front (door) mount
• UL Listed Type 4/4X
• Can be supplied with 40 - 150 psi pressure, compressed air

The Electric Vortex A/C is available in 3 different cooling capacities from 900 to 2,500 BTU/hr*. All of Vortec’s Enclosure Coolers keep Electrical and Electronic Enclosures cool, clean and protected and are a low cost alternative to expensive, high maintenance air conditioners; and avoid contamination with dirty, humid air caused by fans. Today’s small, compact multi-function electronic controls, variable speed drives, servos and programmable logic controllers are extremely sensitive to heat and contamination. Smaller cabinet sizes make temperature control difficult and prone to premature failures. Excessive heat will cause digital displays to misread, controls to drift, and breakers to trip below rated loads. The result is productivity lost due to machine or line shutdowns.

Electric Vortex A/Cs maintain a slight pressurization in the cabinet to keep electrical and electronic components clean and dry; and are thermostatically controlled to maintain enclosure temperatures at a user specified temperature setting.

* All cooling capacities are measured at 100 psi.

Literature

Case Studies

Targeted Cooling of Electrical Systems in Hot & Dirty Environments

Steel mills are extremely hot and often dirty environments yet their operations rely on highly sensitive electronic equipment which must be kept clean and cool. How to solve this inherent contradiction? Many steel industry firms turn to Vortec for expert understanding of their unique cooling needs for targeted cooling.

Click Here to Read

Vortec Chills Out Control Panels in Food Manufacturing Plants

Control panels in food manufacturing plants must be protected from frequent wash-downs as well as high temperatures, or it can result in thousands of dollars of lost revenue. Vortec's coolers are compact and lightweight enough to do the job.

Click Here to Read

A Case Study in Creativity

A pipe coating firm adapts Vortex A/C enclosure coolers to solve a host of space, heat, and operational issues. Featured in organic finishing section of Metal Finishing magazine, this case study explains how natural gas pipeline powder coater EP Pipe Coating (Panama City, Fla.) used four Vortex A/C enclosure coolers to solve space and configuration issues posed by conventional air conditioners on an OEM powder coating system.

Click Here to Read

Accessories

701S-24a Auto Drain Air Filter Models: 7715ES, 7715EB, 7725ES, 7725EB, 7015ES, 7015EB, 7025ES, 7025EB	701S-36a Auto Drain Air Filter Models: 7735ES, 7735EB, 7035ES, 7035EB
Oil Removal Filter 701S-48 Models: 7715ES, 7715EB, 7725ES, 7725EB, 7015ES, 7015EB, 7025ES, 7025EB	Oil Removal Filter 701S-54 Models: 7735ES, 7735EB, 7035ES, 7035EB
Generator Kit: 15 CFM Models: 7715ES, 7715EB, 7015ES, 7015EB	Generator Kit: 25 CFM Models: 7725ES, 7725EB, 7025ES, 7025EB	Generator Kit: 35 CFM Models: 7735ES, 7735EB, 7035ES, 7035EB