Products > Hot Air Gun
Pre-Heating of Parts, Processes and Solutions
Hot Air Guns are used where milder heat is needed as compared to an electric heat gun. It is ideal for pre-heating of parts, processes and solutions, with an output flow rate of 2-8 scfm; and is also widely used for softening adhesives, rubber and vinyl, and accelerating drying. The hot air gun requires no electricity at the target, and uses only filtered compressed air to generate fully adjustable temperatures up to 200 deg F.
Prices start at $375
Benefits
- Softer heat than electric heat guns to prevent scorching
- No spark hazard at the target
- Instant on / instant off
- Pre-heating of parts, processes and solutions
- Softening adhesives, rubber and vinyl
- Accelerate drying
Features
- Hot air flows up to 200°F (93°C)
- No electricity used at the target
- Portable magnetic base
- Exceptionally reliable—no moving parts
- No EMI / RFI interference
- Meets OSHA noise and pressure specifications
Hot Air Gun Specifications
Use the buttons to select either U.S. or Metric Dimension.
| SPECIFICATION | 609 | 609-BSP | 609-1 | 609-1-BSP |
| Heating Capacity (BTU/hr) | 900 | 900 | 900 | 900 |
| Maximum Outlet Temperature (deg F) | 200 | 200 | 200 | 200 |
| Compressed Air Pressure (psig) | 80 - 100 | 80 - 100 | 80 - 100 | 80 - 100 |
| Air Consumption @ 100 psig (scfm) | 15 | 15 | 15 | 15 |
| Inlet Size | 1/4" NPT | 1/4" BSPP | 1/4" NPT | 1/4" BSPP |
| Outlet Air Flow Rate (scfm) | 2 - 8 | 2 - 8 | 2 - 8 | 2 - 8 |
| Recommended Filter Size | 25 scfm | 25 scfm | 25 scfm | 25 scfm |
| Recommended Filter | 701S-24A | 703S-24A | 701S-24A | 703S-24A |
| System or Gun Only? | System | System | Gun Only | Gun Only |
| Dimensions (inches) | ||||
| Overall Length | 17 7/8 | 17 7/8 | 17 7/8 | 17 7/8 |
| Diameter | 1 3/4 | 1 3/4 | 1 3/4 | 1 3/4 |
| Nozzle Length | 8 | 8 | 8 | 8 |
| Flexible Nozzles Diameter | 1 | 1 | 1 | 1 |
| Outlet Diameter (ID) | 3/8 | 3/8 | 3/8 | 3/8 |
| Magnetic Base Height | 4 1/8 | 4 1/8 | - | - |
| Weight (lbs) | 3.0 | 3.0 | 1.0 | 1.0 |
| SPECIFICATION | 609 | 609-BSP | 609-1 | 609-1-BSP |
| Heating Capacity (kcal/hr) | 225 | 225 | 225 | 225 |
| Maximum Outlet Temperature (deg C) | 93 | 93 | 93 | 93 |
| Compressed Air Pressure (bar) | 5.5 - 7 | 5.5 - 7 | 5.5 - 7 | 5.5 - 7 |
| Air Consumption @ 7 bar (slpm) | 425 | 425 | 425 | 425 |
| Inlet Size | 1/4" NPT | 1/4" BSPP | 1/4" NPT | 1/4" BSPP |
| Outlet Air Flow Rate (slpm) | 57 - 227 | 57 - 227 | 57 - 227 | 57 - 227 |
| Recommended Filter Size | 708 slpm | 708 slpm | 708 slpm | 708 slpm |
| Recommended Filter | 701S-24A | 703S-24A | 701S-24A | 703S-24A |
| System or Gun Only? | System | System | Gun Only | Gun Only |
| Dimensions (mm) | ||||
| Overall Length | 454 | 454 | 454 | 454 |
| Diameter | 44 | 44 | 44 | 44 |
| Nozzle Length | 203 | 203 | 203 | 203 |
| Flexible Nozzles Diameter | 25 | 25 | 25 | 25 |
| Outlet Diameter (ID) | 10 | 10 | 10 | 10 |
| Magnetic Base Height | 105 | 105 | - | - |
| Weight (kg) | 1.4 | 1.4 | 0.5 | 0.5 |
Products > Hot Air Gun
Pre-Heating of Parts, Processes and Solutions
Hot Air Guns are used where milder heat is needed as compared to an electric heat gun. It is ideal for pre-heating of parts, processes and solutions, with an output flow rate of 2-8 scfm; and is also widely used for softening adhesives, rubber and vinyl, and accelerating drying. The hot air gun requires no electricity at the target, and uses only filtered compressed air to generate fully adjustable temperatures up to 200 deg F.
Prices start at $375
Benefits
- Softer heat than electric heat guns to prevent scorching
- No spark hazard at the target
- Instant on / instant off
- Pre-heating of parts, processes and solutions
- Softening adhesives, rubber and vinyl
- Accelerate drying
Features
- Hot air flows up to 200°F (93°C)
- No electricity used at the target
- Portable magnetic base
- Exceptionally reliable—no moving parts
- No EMI / RFI interference
- Meets OSHA noise and pressure specifications
Hot Air Gun Specifications
Use the buttons to select either U.S. or Metric Dimension.
| SPECIFICATION | 609 | 609-BSP | 609-1 | 609-1-BSP |
| Heating Capacity (BTU/hr) | 900 | 900 | 900 | 900 |
| Maximum Outlet Temperature (deg F) | 200 | 200 | 200 | 200 |
| Compressed Air Pressure (psig) | 80 - 100 | 80 - 100 | 80 - 100 | 80 - 100 |
| Air Consumption @ 100 psig (scfm) | 15 | 15 | 15 | 15 |
| Inlet Size | 1/4" NPT | 1/4" BSPP | 1/4" NPT | 1/4" BSPP |
| Outlet Air Flow Rate (scfm) | 2 - 8 | 2 - 8 | 2 - 8 | 2 - 8 |
| Recommended Filter Size | 25 scfm | 25 scfm | 25 scfm | 25 scfm |
| Recommended Filter | 701S-24A | 703S-24A | 701S-24A | 703S-24A |
| System or Gun Only? | System | System | Gun Only | Gun Only |
| Dimensions (inches) | ||||
| Overall Length | 17 7/8 | 17 7/8 | 17 7/8 | 17 7/8 |
| Diameter | 1 3/4 | 1 3/4 | 1 3/4 | 1 3/4 |
| Nozzle Length | 8 | 8 | 8 | 8 |
| Flexible Nozzles Diameter | 1 | 1 | 1 | 1 |
| Outlet Diameter (ID) | 3/8 | 3/8 | 3/8 | 3/8 |
| Magnetic Base Height | 4 1/8 | 4 1/8 | - | - |
| Weight (lbs) | 3.0 | 3.0 | 1.0 | 1.0 |
| SPECIFICATION | 609 | 609-BSP | 609-1 | 609-1-BSP |
| Heating Capacity (kcal/hr) | 225 | 225 | 225 | 225 |
| Maximum Outlet Temperature (deg C) | 93 | 93 | 93 | 93 |
| Compressed Air Pressure (bar) | 5.5 - 7 | 5.5 - 7 | 5.5 - 7 | 5.5 - 7 |
| Air Consumption @ 7 bar (slpm) | 425 | 425 | 425 | 425 |
| Inlet Size | 1/4" NPT | 1/4" BSPP | 1/4" NPT | 1/4" BSPP |
| Outlet Air Flow Rate (slpm) | 57 - 227 | 57 - 227 | 57 - 227 | 57 - 227 |
| Recommended Filter Size | 708 slpm | 708 slpm | 708 slpm | 708 slpm |
| Recommended Filter | 701S-24A | 703S-24A | 701S-24A | 703S-24A |
| System or Gun Only? | System | System | Gun Only | Gun Only |
| Dimensions (mm) | ||||
| Overall Length | 454 | 454 | 454 | 454 |
| Diameter | 44 | 44 | 44 | 44 |
| Nozzle Length | 203 | 203 | 203 | 203 |
| Flexible Nozzles Diameter | 25 | 25 | 25 | 25 |
| Outlet Diameter (ID) | 10 | 10 | 10 | 10 |
| Magnetic Base Height | 105 | 105 | - | - |
| Weight (kg) | 1.4 | 1.4 | 0.5 | 0.5 |